Power & Hand ToolsTools and Home Improvement

Top 9 Best Hammer Drills for Construction Work and Home – 2019

When you need to make short work of drilling through masonry or rock with minimal manual labor, a hammer drill can help. A hammer drill is a rotary drill device that offers a hammering, driving, or drilling feature or a mixture of all three. By using the drill, you’re able to make short and fast thrusts, as you would with a standard hammer, to break through masonry and rock quicker than you would by hand. While a typical drill could also do the job, a hammer drill offers a quicker and more efficient way of doing it.

Hammer drills are available as either corded or cordless for your convenience and also come in a range of shapes, styles, and sizes. What’s more, you can choose from a dedicated hammer drill or a standard drill with a hammer function.

If you’re a builder or contractor, purchasing a hammer drill is a must. You may also wish to look at several of the high-quality and often competitively priced options below. You may find they are exactly what you need to get the job done.

9. SKIL 7.0 Amp – Hammer Drill

SKIL 7.0 Amp - Hammer Drill

When a standard hammer or drill won’t do, you need a combination of both – a hammer drill. This hammer drill from SKIL is designed to be both cost-effective and efficient, making it a real easy sell on the market.

Whether you need to drill through masonry, rock, or footpaths around your home or business, you will more than find this hammer drill meets the mark. It boasts a powerful seven-amp motor, is designed to handle the toughest of tasks, and is packed full of convenient features to make handling of it a lot more comfortable.

If you want to be able to control the drilling speed, this hammer drill also has you covered here too. Its variable speed trigger ensures you’re in control at all times. What’s more, it has a side-assist handle which means you can drill rock with more accuracy and power than without one.

However, there is more to this drill than meets the eye. While it’s designed for hammering through rock, masonry, and concrete, it can also do so much more. It has a half-inch chuck to hold large diameter bits which means you can also use it for cutting as well as woodwork. With so many features packed into one small power tool, it’s clear to see you get excellent bang for the buck.

8. Bosch HD18-2 – Two-Speed Hammer Drill

Bosch HD18-2 - Two-Speed Hammer Drill

If you want a hammer drill that will not only get the job done but will be comfortable, efficient and practical at the same time, then this one will tick all of the boxes. Under the well-known Bosch name, it’s a robust and powerful tool that suits many DIYers and professionals to a tee.

It has a powerful eight-and-a-half-amp motor, can handle high-torque drilling and does so at high speeds as well. As a result, you’re able to drill through rock, concrete, and masonry in less time than several other drills on the market.

What is also sure to appeal is its auxiliary handle. This handle has a built-in depth gauge that shows you how far you’re drilling while enabling you to keep it consistent. It also has a slip clutch for additional peace of mind, as well as a dual-mode selector so you can turn it from a hammer drill into a rotation-only device. Designed to be robust, hardy, and to last the distance, it also has a half-inch three-jaw chuck. As such, you’re able to use it in the toughest of conditions and achieve exceptional results.

7. Hiltex 10513 – Rotary Hammer Drill

Hiltex 10513 - Rotary Hammer Drill

A hammer drill that’s packed full of convenient features to make your job easier is something to aim for, and this Hiltex rotary hammer drill delivers. With 1,000 watts of power and a five-foot impact, it’s able to handle the toughest tasks – whether it be drilling through brick, concrete, or even solid steel.

Affordably priced on the market, it’s a hammer drill that will offer no end of satisfaction. It has three function modes for rotation, chiseling, and hammering, and has a 360-degree swivel function to ensure you’re always in control and comfortable during its use. It also has exceptionally high capacities given its size and makes short work of even the hardest of steel or concrete.

When you purchase this drill, you also get more than just the tool. It comes with a case, a chuck with an adaptor, depth gauge, oil, six drills and two chisels. As a result, you’re well set up to begin the drilling task immediately. You will love everything this drill has to offer.

6. DeWALT DCD985BT – Cordless Hammer Drill

DeWALT DCD985BT - Cordless Hammer Drill

This cordless hammer drill from DeWALT is the epitome of convenience. Not only is it suitable for both DIYers and professionals, but it requires no power source. Charge the battery and get to work drilling through concrete and masonry with ease.

This drill is designed to be both useful and robust. It can handle the toughest of materials, all the while managing the pressure that goes with it. It has a three-speed metal transmission, delivers 535 watts of power, and even has carbide inserts inside the chuck to make sure the bit grips as efficiently as possible. This hammer drill is one many homeowners and professionals would love to own.

While it’s affordable on the market, it also gets the job done. It’s fast, accurate, has an LED light after the trigger releases as a bonus, and is heavy duty as well. However, it’s not just the tool that’s effective, but the battery as well. Once it charges, it provides hours of drilling before charging in only a few hours on the quick charger. If you find yourself in a situation where there is no power, this DeWALT hammer drill will come to the party.

5. DeWALT DCD966B Bare Tool – 3-Speed Hammer Drill

DeWALT DCD966B Bare Tool - 3-Speed Hammer Drill

DeWALT has gained a name for itself for being a reliable manufacturer of power tools, and this hammer drill is no exception to that rule. While it’s priced within reach of DIYers and professionals alike, it still ensures it will get the job done in a fast and effective way.

What most people will notice first is its power. It offers a high-performance transmission which enables it to run faster and get the job done quicker. The brushless motor is also considered high efficiency, allowing it to deliver over half as much more run time than that of a standard brushed motor.

It has a three-mode LED light, offers a high BPM rate for drilling into masonry and rock and is exceptionally convenient given its battery instead of a power supply. As a result, you just need to charge it before you begin the job and it will provide a decent number of hours on the job.

While the battery doesn’t come with this model, you can pick it up for an affordable price and interchange it between other DeWALT tools.

4. Tacklife PID01A

Tacklife PID01A

If you’re in the market for a hammer drill, but you have a relatively small budget, then this Tacklife drill is for you. While it’s priced to be affordable for all, it doesn’t mean you have to compromise on value. It’s lightweight at a little over four pounds, offers a powerful six-amp copper motor, and is packed full of convenient features that can make your job a little more comfortable.

Whether you’re drilling through rock, masonry, or brick, this drill will more than get the job done. It has a variable speed function – giving you full control over the speed, and you can even lock this speed in place to reduce fatigue on your hands. You are sure to find that many of the features of this drill are with your convenience in mind.

When it comes to power, this drill also ticks the boxes here too. It generates 30 percent more power than drills with similar specs and is robust and durable to handle steel, concrete, and more. It even has a dual-selector, giving you the versatility to swap between hammering and drilling when you need.

Sealing the deal is the side handle that swivels 360 degrees and offers greater control, as well as the depth gauge to control your drilling depth. Even the chuck is designed to provide the tightest fitting bit. There’s every reason to consider adding this hammer drill to your shopping cart.

3. Neiko 10506A – 4.2 Amps Reversible Hammer Drill

Neiko 10506A - 4.2 Amps Reversible Hammer Drill

Designed to be one of the most affordable hammer drills on the market, this tool from Neiko is sure to impress DIYers. It features a robust and powerful 4.2-amp motor, is designed to tackle the toughest of tasks, and does it all for a very affordable price tag.

What users appreciate about this hammer drill is while it’s cheap, it can still handle all of the same materials as leading brands. It can drill through concrete, steel, masonry, and brick, all the while being easy to handle. It has robust plastic housing, absorbs shock through the easy-grip handles, and will continue to operate at high speeds of up to 2,800RPM. It’s everything you could need in a hammer drill and more.

No matter your task, you will also find this hammer drill will adapt to suit. It comes with a half-inch chuck capacity for many different bit sizes and tightens these up securely for your peace of mind. It then lets you operate it at various speeds so you can feel comfortable at all times. For such a small purchase price, you certainly get a lot of bang for your buck.

2. Ryobi P251 – Brushless Hammer Drill

Ryobi P251 - Brushless Hammer Drill

Designed to get the job done and so much more, this hammer drill is sure to appeal to those who like to dabble in DIY, as well as professionals. While it’s battery-powered opposed to outlet powered, it doesn’t make it any less capable of being a robust and useful tool. Charge the battery that’s interchangeable with other Ryobi tools, then set it to work. You will be more than satisfied with the power on offer.

It has three different drilling modes for your convenience – hammer, drilling, and driving, and it’s robust for all kinds of materials. Whether you need the gentle approach for drilling through wood and plastic or the rugged hardiness of getting through steel or stone, this hammer drill comes to the party. What’s more, it even has a 24-position clutch to give you full control over power for small or large jobs.

Users will also enjoy how convenient this hammer drill is to use. Rather than spend ages trying to find drill bits, this drill has a magnetic bit holder to the side of the base for secure storage. What’s more, it has a plastic side handle for ultimate control. This handle can be moved to either side, depending on whether you’re left or right-handed. It’s clear to see it’s a hammer drill that will provide no end of convenience to the user.

1. Milwaukee 2607-20 – 1,800 RPM Hammer Drill

Milwaukee 2607-20 - 1,800 RPM Hammer Drill

If branding means a lot to you, especially when quality accompanies it, then it might be time to invest in this hammer drill from Milwaukee. Not only is it manufactured from a brand known for its quality tools, but it will be well-loved by both professionals and DIYers.

It has three drilling modes which let you switch between hammering, drilling, and diving, and is designed for use on a range of materials. Whether you’re working plastic, hard or soft wood, masonry or steel, you can rely on this tool to get the job done. It even comes with an 18-position clutch to give you more control as the user.

When you purchase a hammer drill, you also want to know it will last the distance. After all, it has to be able to drill into hard materials without fail. You can rest assured this one will. With metal gear casing, it’s a robust and durable tool that is designed for the motor to run at full speed at all times. Therefore, it will continue to get the job done time and time again. It comes with a belt clip, LED lighting, and an affordable price tag as well. There’s every reason to consider purchasing this hammer drill today.

Tags

Related Articles

Back to top button
Close
Close